Справочник Пользователя для Rigol MSO1074Z-S 4-channel oscilloscope, Digital Storage oscilloscope, MSO1074Z-S
Модели
MSO1074Z-S
RIGOL
DS1000Z Programming Guide
2-53
:MEASure:SOURce
Syntax
:MEASure:SOURce <sour>
:MEASure:SOURce?
:MEASure:SOURce?
Description
Set or query the source for parameter measurement.
Parameter
Name
Type
Range
Default
<sour>
Discrete
{CHANnel1|CHANnel2|CHANnel3|CHANnel4}
CHANnel1
Explanation
This command is used to set the source for parameters (except for delay and phase)
measurement. Delay and phase measurements need to set two sources which can be
and
and
Return
Format
The query returns CHAN1, CHAN2, CHAN3 or CHAN4.
Example
:MEASure:SOURce CHANnel2
Related
Command
:MEASure:COUNter:SOURce
Syntax
:MEASure:COUNter:SOURce <sour>
:MEASure:COUNter:SOURce?
:MEASure:COUNter:SOURce?
Description
Set or query the source of the frequency counter, or disable the frequency counter.
Parameter
Name
Type
Range
Default
<sour>
Discrete {CHANnel1|CHANnel2|CHANnel3|CHANnel4|OFF} OFF
Return
Format
The query returns CHAN1, CHAN2, CHAN3, CHAN4 or OFF.
Example
:MEASure:COUNter:SOURce CHANnel2
Related
Command
:MEASure:COUNter:VALue?
Syntax
:MEASure:COUNter:VALue?
Description
Query the measurement result of the frequency counter. The default unit is Hz.
Return
Format
The query returns the measurement result in scientific notation. If the frequency counter
is disabled, 0.0000000e+00 will be returned.
Example
:MEASure:COUNter:VALue? /*The query returns 1.000004e+03*/
Related
Command