Справочник Пользователя для Rigol DS2102A 2-channel oscilloscope, Digital Storage oscilloscope, DS2102A
Модели
DS2102A
RIGOL
DS2000A User’s Guide
2-2
To Enable the Channel
DS2000A provides 2 analog input channels (CH1 and CH2) and provides independent
vertical control system for each channel. As the vertical system setting methods of
the 2 channels are completely the same, this chapter takes CH1 as an example to
introduce the setting method of the vertical system.
Connect a signal to the channel connector of any channel (for example, CH1) and
then press CH1 in the vertical control area (VERTICAL) at the front panel to enable
CH1.
Screen:
The channel setting menu is displayed at the right side of the screen and the channel
label at the bottom of the screen (as shown in the figure below) is highlighted. The
information displayed in the channel label is related to the current channel setting.
After the channel is turned on, modify the parameters such as the vertical scale,
horizontal time base and trigger mode according to the input signal to make the
waveform display easy to observe and measure.