Техническая Спецификация для Transcend Card Reader MP3 (NOR FLASH) black Black MD111AXXX

This product is a mobile device designed to play MP3 audio files. Files can be copied directly from the computer

to a microSD card (optionally available), and vice versa, using the USB jack cable. Power is supplied with 

an integrated LiPo battery that can be charged via a USB connection. Contact with moisture, such as in 

bathrooms, must be avoided.

For safety and approval purposes (CE), you must not rebuild and/or modify this product. If you use the product 

for purposes other than those described above, the product may be damaged. In addition, improper use can 

cause hazards such as short circuiting, fire, electric shock etc. Read the instructions carefully and keep them.

Make this product available to third parties only together with its operating instructions. 

•  MP3 player

•  USB jack cable

•  Earphones

•  Operating instructions

•  The device is not a toy. Keep it out of the reach of children and pets.

•  Do not leave packaging material lying around carelessly. These may become dangerous playing material 

for children.

•  Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity, moisture, 

flammable gases, vapours and solvents.

•  Do not place the product under any mechanical stress.

•  If it is no longer possible to operate the product safely, take it out of operation and protect it from any 

accidental use. Safe operation can no longer be guaranteed if the product:

 - is visibly damaged, 

 - is no longer working properly, 

 - has been stored for extended periods in poor ambient conditions or 

 - has been subjected to any serious transport-related stresses.

•  Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage the 

product.

•  Also observe the safety and operating instructions of any other devices which are connected to the product.

•  Do not listen to excessively loud music over an extended period of time. This may damage your hearing.

•  The rechargeable battery is permanently built into the product and cannot be replaced.

•  Never damage the rechargeable battery. Damaging the casing of the rechargeable battery might cause an 

explosion or a fire! Unlike conventional batteries/rechargeable batteries (e.g. AA or AAA type), the casing

of the LiPo rechargeable battery does not consist of a thin sheet but rather a sensitive plastic film only.

•  Never short-circuit the contacts of the rechargeable battery. Do not throw the battery or the product into fire.

There is a danger of fire and explosion!

•  Charge the rechargeable battery regularly, even if you do are not using the product. Due to the rechargeable  

battery technology being used, you do not need to discharge the rechargeable battery first.

•  Never charge the rechargeable battery of the product unattended.

•  When charging, place the product on a surface that is not heat-sensitive. It is normal that a certain amount  

of heat is generated during charging.

•  Consult an expert when in doubt about operation, safety or connection of the device.

•  Maintenance, modifications and repairs are to be performed exclusively by an expert or at a qualified

shop.

•  If you have questions which remain unanswered by these operating instructions, contact our technical 

support service or other technical personnel.

1  LED (red)

2 Button 

3 Button 

4  Button RESET (flush mounted)

5 Button 

6  Jack socket

7  microSD slot (on lower side of MP3 player)

1

2 3 4

5

7

6

1.  Charge the battery completely before using the MP3 player for the first time.

2.  Connect the USB jack cable to the jack socket (6) of the MP3 player and an available USB port on a 

computer.

3.  The battery will automatically start to charge. The red LED (1) flashes during charging.

4.  The battery is fully charged when the red LED stays on permanently.

5.  Disconnect the MP3 player from the USB power source.

1.  Ensure the MP3 player is turned off (red LED not on).

2.  Note the label next to the slot (7) for the correct orientation of the microSD card.

3.  Carefully insert a microSD card into the slot until it audibly locks into place.

If the microSD card is not recognised, please use a microSD card from another manufacturer or 

a microSD card with a different memory size.

4.  Turn the MP3 player off before removing the microSD card. To remove the memory card from the slot, first

push it in slightly. The microSD card can now be removed.

Never remove a microSD card from the slot during playback. Data on the microSD card could be 

destroyed this way. There is a risk that the microSD would not be readable afterwards. No liability 

can be accepted for possible data loss.

1.  Connect the USB jack cable to the jack socket (6) of the MP3 player and an available USB port on a 

computer.

2.  The microSD card is automatically recognised as a drive.

3.  Save the MP3 data on the microSD card.

4.  Always deactivate the microSD card through the operating system before disconnecting the USB jack cable 

from the MP3 player or the computer.

1.  Connect the earphones to the jack socket (6).

2.  Turn the MP3 player on by pressing and holding button   (3) until the red LED (1) lights up. The playback 

of the MP3 files starts. The red LED (1) flashes during playback.

3.  Press the button   (3) to switch the MP3 player into pause mode. The red LED (1) stays on permanently.

If no buttons are pressed for approx. 2 minutes in pause mode, the MP3 player turns off 

automatically. 

4.  Press button   (5) to move to the next track. Press the button   (2) to move to the previous track.

5.  The volume can be set during playback. Press and hold button   (2) or   (5) to decrease or increase the 

volume, respectively.

6.  If there is a malfunction, the MP3 player has to be reset. Using a pointed object, press the flush mounted

button RESET (4) for approx. 2 seconds.

7.  Turn the MP3 player off by pressing and holding button   (3) until the red LED (1) goes off.

The device does not need any servicing. The device‘s outside should be cleaned with a soft, dry cloth or a 

brush only. Never use any aggressive cleaning agents or chemical solutions that may damage the surface of 

the casing.

Electronic devices are recyclable waste and must not be disposed of in the household waste.

At the end of its service life, dispose of the product according to the relevant statutory regulations.

You as the end user are required by law (Battery Ordinance) to return all used batteries/rechargeable batteries. 

Disposing of them in the household waste is prohibited.

Contaminated (rechargeable) batteries are labelled with this symbol to indicate that disposal in the 

domestic waste is forbidden. The designations for the heavy metals involved are: Cd = Cadmium, 

Hg = Mercury, Pb = Lead (name on (rechargeable) batteries, e.g. below the trash icon on the left).

Used (rechargeable) batteries can be returned to collection points in your municipality, our stores or 

wherever (rechargeable) batteries are sold. 

You thus fulfil your statutory obligations and contribute to the protection of the environment.

Power supply:

Internal LiPo rechargeable battery, 3.7 V

Battery capacity:

120 mAh

System requirements:

Microsoft® Windows XP (32-bit), Windows Vista™, 7 (32/64-bit);

Mac OS 10.0 and higher

Memory card format:

microSD (max. 16 GB), FAT 16 or FAT 32 formatted

Cable length:

approx. 0.5 m (USB jack cable) / approx. 1.2 m (earphones)

Dimensions (W x H x D): 55 x 12 x 14 mm

Weight:

approx. 11 g

These operating instructions are published by Conrad Electronic SE,

Klaus-Conrad-Straße 1, D-92240 Hirschau/Germany.

All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming,

or the capture in electronic data processing systems require the prior written approval by the editor. 

Reprinting, also in part, is prohibited.

The operating instructions reflect the current technical specifications at time of print.

We reserve the right to change the technical or physical specifications.

V1_0912_02-KV