Справочник Пользователя для Renkforce SATA harddrive casing 3.5 " GD35612-3.0 USB 3.0 GD35612-3.0

These  operating  instructions  are  published  by  Conrad  Electronic  SE,  Klaus-Conrad-Str.  1,

D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming,

or the capture in electronic data processing systems require the prior written approval by the editor.

Reprinting, also in part, is prohibited.
These  operating  instructions  represent  the  technical  status  at  the  time  of  printing.  Changes  in

technology and equipment reserved.
© Copyright 2014 by Conrad Electronic SE. 

•  For  Windows®  operating  systems,  you  can  use  the  control  panel  for  partitioning  and

formatting.

•  When using Windows® 7, for example, open “System and security” from the control panel.

Click on “Management” and then on “Creating hard drive partitions”. Select the respective

hard drive and create a new partition.

•  Then format the new partition. Quick formatting is sufficient in such a case. Performing a

normal formatting procedure can take a very long time to complete depending on the hard

drive capacity.

•  Contact an expert if you have any doubts regarding partitioning/formatting.

•  USB 3.0 devices are downwardly compatible. That means that the product with the installed

hard drive can also be connected to common USB 2.0 ports or slow USB 1.1 ports. The

transfer speed will be reduced accordingly, though.

•  Ideally, USB 3.0 makes speeds of over 100 Mbyte/s possible depending on your computer’s

hard drive, the hard drive mounted in the casing, and the USB 3.0 controller.

•  Using a common USB 2.0/1.1 cable instead of the included USB 3.0 cable will reduce the

transfer rate.

•  If you want to connect the product via a USB hub, the USB hub has to support USB 3.0 for

the maximum transfer rate to be possible.

•  When turning on the hard drive case, the blue LED lights up. The LED starts flashing when

reading/writing operations access the hard drive.

•  Note that some operating systems do not support external hard drives with capacities of

>2 TB. Contact the manufacturer of the operating system for more information.

•  Please  note  that  files  might  get  damaged  or  the  operating  system  could  crash,  if  the

connecting cable is disconnected or if the product is switched off during data transfer. Always

safely remove the product through the operating system first before switching off the product

or disconnecting the connecting cable.

•  Always handle hard drives very carefully. Impacts during operation and even for several

seconds after switching off the product can cause the reading/writing heads to touch the

magnetic discs, which in turn could damage the hard drive.

•  When connecting the hard drive for the first time, it could take approx. one minute for the

hard drive to be recognized. The length of this time period varies depending on the operating

system.

•  Switch off the product before cleaning. Disconnect the power adapter from the mains. Wait

for at least 30 seconds until all magnetic discs have come to a complete stop.

•  Besides occasional cleaning, the device is maintenance-free. To clean the device, use a soft,

anti-static and lint-free cloth.

•  You can use a clean, long-haired brush and a vacuum cleaner to easily remove any dust.

Electronic devices are recyclable waste and must not be disposed of in the household

waste.
At the end of its service life, dispose of the product according to the relevant statutory

regulations.

You thus fulfil your statutory obligations and contribute to the protection of the environment.

System requirements ................. Windows® ME, 2000

...................................................

XP (Home, Pro, with SP1, SP2, SP3, only 32 bit)

...................................................

Vista™ (32/64 bit), 7 (32/64 bit), 8, 8 Pro

...................................................

Enterprise 7, Enterprise 8

...................................................

RT (USB On-the-go (OTG) is not supported)

...................................................

Mac OS 9.x and higher

...................................................

Linux 2.4.x and higher

Suitable for ................................ 8.9 cm (3.5“) SATA hard drive
USB standard ............................ USB 3.0 (downward compatible to USB 2.0/1.1)
Hard drive capacity .................... max. 4 TB

.....................................................

(Depending on the operating system. 4 TB supported starting

.....................................................

from Windows® 7)

USB cable length ....................... approx. 73 cm
Operating conditions .................. +5 to +40 ºC, 10 – 80 % RH
Storage conditions ..................... -20 to +70 ºC, 5 – 90 % RH
Dimensions (W x H x D) ............ 179 x 120 x 32 mm
Weight ....................................... 255 g

Input voltage / current ................ 100 – 240 V/AC, 50/60 Hz, 800 mA
Output voltage / current ............. 12 V/DC, 2000 mA