Справочник Пользователя для Becker Transit 70 LMU 1501790000

GENERAL OPERATION

>>>

With a 4-pin 3.5mm jack cable you can
integrate your Navigation device
seamlessly into your vehicle. 

• connect your Navigation device to the 

phone mute function of your audio 
system. If the cable is connected 
correctly, your audio system will mute 
the car radio during navigation 
announcements.

• connect your Navigation device to your 

audio system for output of the audio 
signal.

> Plug the cable into the designated 3.5

socket on the underside of the device.

You can connect your rear view camera
to your navigation device using a 4-pin
2.5mm AV cable. Insert the cable into the
socket provided on the back of the basic
unit, also see page 16. 

You can make the necessary settings in
the chapter “Rear View camera” on
page 125.

Your Navigation device has a slot for a
micro SD memory card.
As the map data is stored in an internal
memory on the Navigation device, the
slot for a micro SD memory card is used
for updates and for viewing images.
The memory card can also be used for
supplementing the map data.

The card slot is located on the left on the
underside of the unit. The card slot is
equipped with a spring-actuated locking
and ejector mechanism.

Note:

Once the cable is connected, the
loudspeaker of the basic device is
switched off. 

GND
Video
Audio-R
Audio-L

GND

Telephone Mute:

Audio-R

Audio-L