Справочник Пользователя для Becker Transit 70 LMU 1501790000

GENERAL OPERATION

>>>

> Press the button for the required

language.

> The selection is confirmed by pressing

.

> Then select the desired voice. 

A short example announcement is given.
> Confirm your selection by pressing the

 button.

The following prompt appears shortly
afterwards: 

> If you agree to the request contained in

this prompt, press the 

 button.

You can switch the unit off at any time.
> Press the button on the top of the

Navigation device.

The Navigation device switches to sleep
mode.
> Before finally switching off the naviga-

tion device, press the I/O switch on the
underside of the device to 0.

For devices without the I/O switch on the
underside:
> Press the switch on the top of the

navigation device for longer than
3 seconds  to  finally switch it off.

Note: for models with TTS

Voices with a (TTS) tag support the text-
to-speech function (e.g. announcing
roads and reading out text messages).

Note:

Use of the Navigation device is only
permitted in accordance with the
national road traffic regulations
applicable at the time.

Note:

We recommend that you place the
Navigation device in sleep mode in the
event of short interruptions to operation
(of up to a week). 
This significantly reduces the switch-on
time and the Navigation device finds the
satellites required for navigation much
faster.
If route guidance was active when sleep
mode is activated, it is automatically
resumed if the Navigation device is
switched back on again within approx.
4 hours.
If  the  device  cannot  be  switched  off
anymore or no longer works reliably, it
is possible to switch off devices without
I/O switches completely by pressing the
button on the top for longer than
7 seconds.