Справочник Пользователя для Becker Transit 70 LMU 1501790000

>>>

NAVIGATION MODE

Moving the map
You can move the map to any point.
> To do this, press the map briefly.

> Then press any point on the map and

move it in the required direction.

The map is then moved accordingly.

You can also select a point as a destina-
tion as described under "Selecting a des-
tination from the map" on page 56.

Map orientation
When a route is activated, the map view
can be oriented in different ways. 
If you have selected a 2D view in the
Navigation settings in the map view (see
page 64), this pertains to the compass
direction only.
> Press the 2D map view on the display

a little longer.

Apart from the pulsating point, a
compass and two arrow buttons pointing
to the left and right appear on the top
edge of the screen. 
> Press the 

 and 

 buttons to

rotate the map towards the desired
compass direction. 

You can orient the map for example in
the direction of travel.
If you have selected a 3D display for the
map view, the vertical display angle can
be adjusted, too.
> Press the 3D map view on the display

a little longer.

Apart from the pulsating point, a com-
pass and two arrow buttons 

 and 

pointing to the left and right appear on
the top edge of the screen, and on the left
edge of the screen, two arrow buttons
pointing up and down are displayed.
> Press the 

 button.

Note:

By pressing the 

 you can

display your current position again.