Справочник Пользователя для AEG AR 4021 BT 400402

91

Confirm your selection with the 

 

‹

SEL but-

ton (5). 

DIAL   is shown on the display.

Enter with the help of the 

 

‹

tons the desired phone number.

Save the phone number by pressing the 

 

‹

SEL button. SAVE OK is shown on the 

display.

 

If you have entered one or more numbers 

 

►

incorrectly, you can delete the numbers 

using the 

/BND button (26). 

Press briefly: The numbers are deleted 

individually. 

Keep pressed: All entered numbers are 

deleted.

The saved speed dials are lost if the car 

 

►

radio has been reset using the 

RESET but-

ton (30).

Press the 

 

‹

 button (3). 

DIAL   is shown 

on the display.

Now keep the corresponding numeric 

 

‹

button pressed to call the desired phone 

number. 

CALLING appears on the display.

RECEIVED Here you can display a list of the last received 

phone numbers. Press the   button (3) to call 

the displayed number.

Here you can display the last 10 dialed phone 

numbers.

MISSED Here you can display missed calls.
MANU 

Call answering settings

■

: To accept a call you must 

press the   button (3).

■

: The car radio accepts the call 

without having to press the button.

You can set the desired talk volume here.

Use the 

 

‹

/BND button (26) to end outgoing or 

incoming calls. 

CALL END is shown on the display.

 

To reject an incoming call, press again the 

 

►

/BND 

button (26).

Press the 

 

‹

 button (3). 

DIAL   is shown on the 

display.

The phone number is entered using the numeric 

 

‹

buttons. The entered phone number is shown on the 

display of the car radio.

 

If you have entered one or more numbers incor-

 

►

rectly, you can delete the numbers using the 

BND button (26). 

Press briefly: The numbers are deleted individually. 

Keep pressed: All entered numbers are deleted. 

To call the desired number, press afterwards the  

 

‹

 button (3). 

CALLING is shown on the display.

Redial
The unit saves the last dialed number. To retrieve this, fol-

low the steps below:

Press the 

 

‹

 button twice (3). 

LAST NUM and then the 

last selected phone number is shown on the display.

Press the 

 

‹

 button (3) again to call the phone num-

ber.

Incoming calls
When there are incoming calls, a ring tone sounds from 

the speakers and if the caller has a CLIP ”

Calling Line 

Identification Presentation (Caller ID)“ enabled phone, the 

caller number appears on the car radio display. Otherwise 

“RINGING“ appears on the display.

To be able to answer an incoming call, press the 

 

‹

 

button (3). You can listen to the caller through via the 

speakers in your car.

Transfer call between car radio and mobile phone
You can transfer a call again to your mobile phone.

To do so, keep the 

 

‹

T-MENU button (25) pressed. 

TRANSFER is shown on the display (7). The car radio 

activates the MUTE mode. Keep this button down 

again pressed to transfer the call to the car radio.

Music reproduction via A2DP (Advanced 

Audio Distribution Profile)

This involves a cross-manufacturer Bluetooth profile. 

Stereo audio signals are transferred wireless between the 

playback unit (source) and receiver unit. To be able to 

remote control the source, the playback unit must support 

the AVRCP profile (

Audio Video Remote Control Profile).

Full functionality cannot be guaranteed due to different 

unit manufacturers, model and software versions.

After you have connected the devices to each other, 

 

‹

you can start to music reproduction using the 

PAU 

button (9). You must start music reproduction before-

hand on your mobile phone, depending on the device 

manufacturer, model and software versions.

Use the 

 

‹

/  buttons (23) to select the next or previous 

music title.