Техническая Спецификация для Arctic Cooling ARCTIC MX-2 ORACO-MX20101-BL
Модели
ORACO-MX20101-BL
Status: 15.06.2009
Trade name: ARCTIC MX-2
Date of printing: 15.06.2009
Version: 1.0.0 / GB
EC safety data sheet
page: 3(5)
8.)
Exposure controls / personal protection
Exposure limit values
ZINC OXIDE
CAS no.
1314-13-2
EC no.
215-222-5
Occupational Exposure Standards (OESs) / EH40
Zinc oxide, fume
TWA
Zinc oxide, fume
TWA
5
mg/m³
STEL
10
mg/m³
Personal protective equipment
Respiratory protection
If workplace exposure limits are exceeded, a respiration protection approved for this particular job must
be worn. In case of dust formation, take appropriate measures for breathing protection in the event
workplace threshold values are not specified.
be worn. In case of dust formation, take appropriate measures for breathing protection in the event
workplace threshold values are not specified.
Hand protection
In case of intensive contact, wear protective gloves (EN 374). Before use, the protective glove should be
tested in any case for its specific work-station suitability (i.e. mechanical resistance, product compatibility
and antistatic properties). Adhere to the manufacturer’s instructions and information relating to the use,
storage, care and replacement of protective gloves. Protective gloves shall be replaced immediately
when physically damaged or worn. Design operations thus to avoid permanent use of protective gloves.
tested in any case for its specific work-station suitability (i.e. mechanical resistance, product compatibility
and antistatic properties). Adhere to the manufacturer’s instructions and information relating to the use,
storage, care and replacement of protective gloves. Protective gloves shall be replaced immediately
when physically damaged or worn. Design operations thus to avoid permanent use of protective gloves.
Eye protection
Safety glasses (EN 166)
Skin protection
Clothing as usual in the chemical industry.
General protective and hygiene measures
Do not eat, drink or smoke during work time. Keep away from foodstuffs and beverages. Wash hands
before breaks and after work. Have eye wash fountain available. Do not inhale dust.
before breaks and after work. Have eye wash fountain available. Do not inhale dust.
9.)
Physical and chemical properties
General information
Form
grease
Colour
grey
Odour
odourless
Important health, safety and environmental information
Fire promoting Properties
Oxidizing
no
Explosion limits
Remarks
not applicable
Density
Value
3,35
g/cm³
10.) Stability and reactivity
Conditions to avoid
no data available
Materials to avoid
strong oxidizing agents