Справочник Пользователя для Homematic 132087 Wireless reverse phase control dimmer 1-channel Adapter 132087
Модели
132087
34
Button
Response
Press and release "ON" button
ON
Press and release "OFF" button
OFF
Press and hold down "ON" button Dim up
Press and hold down "OFF" button Dim down
8 Resetting to the initial state
To reset the actuator to the initial state, put the device
into teach-in mode using the channel button (hold it
down for at least 4 seconds). If the device is in teach-
in mode, hold the channel button down for at least 4
seconds again. If the device LED flashes quickly, this
indicates that the actuator is being reset.
into teach-in mode using the channel button (hold it
down for at least 4 seconds). If the device is in teach-
in mode, hold the channel button down for at least 4
seconds again. If the device LED flashes quickly, this
indicates that the actuator is being reset.
9 Device LED feedback
9.1 Flashing codes
Various actuator states are indicated by the channel
LED flashing:
LED flashing: