Справочник Пользователя для Olympus E-410 010584

   EN

Shooti

ng functions – Selecting the appropriate mode for shooting condi

tions

• The exposure level indicator appears on the control panel screen, showing the difference (ranging 

from –3 EV to +3 EV) between the exposure value calculated by the currently selected aperture 
and shutter speed compared to the exposure value considered optimum by the camera.

During shooting at slow shutter speeds, noise may appear on-screen. These phenomena are 
caused when current is generated in those sections of the image pickup device that are not normally 
exposed to light, resulting in a rise in temperature in the image pickup device or image pickup device 
drive circuit. This can also occur when shooting with a high ISO setting in an environment exposed 
to heat. To reduce this noise, the camera activates the noise reduction function.

g “Noise reduction” (P. 53)

J You can take a picture with a bulb exposure time in which the shutter stays open as long as you 

hold down the shutter button. Set the shutter speed to [BULB] in the M mode. Bulb shooting can 
also be done using an optional remote control (RM-1).

g “Bulb shooting on the remote control” (P. 41)



J The use of a monopod or tripod is recommended when taking a picture at slow shutter speed.

The viewfinder shows the focused area (depth of field) with the selected aperture value. For the 
preview function to work by pressing the b button, it is necessary to set the function of the b button 

on the menu beforehand.

g “7 FUNCTION” (P. 67)

b button to use the preview function.

• When [

7 FUNCTION] is assigned to [LIVE PREVIEW], 

pressing the 

b button automatically switches the camera to live 

view for a preview of the picture on the monitor.

Exposure level 
indicator

Underexposure

Optimum 
exposure

Overexposure

b button