Техническая Спецификация для Gw Instek AFG-2125 Function Generator, Frequency Generator AFG-2125
Модели
AFG-2125
AFG-2000 Series User Manual
86
Functionality
check
check
Run this query command via the terminal.
*idn?
This should return the Manufacturer, Model
number, Serial number, and Firmware version in
the following format.
GW INSTEK, AFG-2125, SN:XXXXXXXX,Vm.mm
*idn?
This should return the Manufacturer, Model
number, Serial number, and Firmware version in
the following format.
GW INSTEK, AFG-2125, SN:XXXXXXXX,Vm.mm
Note
^j and ^m can be used as the terminal character
when using a terminal program.
when using a terminal program.
PC Software
The proprietary PC software, downloadable from
GWInstek website, can be used to download
waveforms.
GWInstek website, can be used to download
waveforms.
Command Syntax
Compatible
standard
standard
IEEE488.2, 1992 (fully compatible)
SCPI, 1994 (partially compatible)
Command Tree
The SCPI standard is an ASCII based standard that
defines the command syntax and structure for
programmable instruments.
Commands are based on a hierarchical tree
structure. Each command keyword is a node on
the command tree with the first keyword as the
root node. Each sub node is separated with a
colon.
Shown below is a section of the SOURce[1] root
node and the APPLy/OUTPut and
SINusoid/SQUare sub nodes.
defines the command syntax and structure for
programmable instruments.
Commands are based on a hierarchical tree
structure. Each command keyword is a node on
the command tree with the first keyword as the
root node. Each sub node is separated with a
colon.
Shown below is a section of the SOURce[1] root
node and the APPLy/OUTPut and
SINusoid/SQUare sub nodes.