Техническая Спецификация для Conrad Energy NiMH-BatteryAA-Single cell1.2 V / Solder lug: Yes 206638
Модели
206638
Product Specification
Model No： VGPAA1800
Document Number ERS-2012-P-Y
Edition: A
Page 4 of 4
6. WARRANTY
One year limited warranty against workmanship and material defects.
7. CAUTION
1. Batteries should be charged prior to use
2. For charging methods please referred to our technical handbook
3. Use the correct charger for Ni-Cd or Ni-MH batteries
4. Do not reverse charge batteries
5. Do not subject batteries to adverse condition such as extreme temperature, deep cycling and excessive
2. For charging methods please referred to our technical handbook
3. Use the correct charger for Ni-Cd or Ni-MH batteries
4. Do not reverse charge batteries
5. Do not subject batteries to adverse condition such as extreme temperature, deep cycling and excessive
over charge/over discharge.
6. Avoid batteries being used in an airtight compartment. Ventilation should be provided inside the battery
compartment ,otherwise batteries may generate hydrogen gas , which could cause an explosion if exposed
to an ignition source
7. Do not attempt to take batteries apart or subject them to pressure or impact. Heat may be generated or fire
may result. The alkaline electrolyte is harmful to eyes and skin, and it may damage clothing upon contact.
8. Keep away from children. If swallowed,contact a physician at once.
9. Do not short circuit batteries, permanent damage to batteries may result
10. Do not incinerate or mutilates batteries, may burst or release toxic material.
11. Do not solder directly to cells or batteries.
12. Store batteries in a cool dry place,Always disharge batteries before bulk storage or shipment.
13. If find any noise,excessive temperature or leakage from a battery, please stop its use.
14. When using a new battery for the first time or after long term storage, please fully charge the battery before
use
15. When using a new battery in use with semi-used batteries, over-discharge may occur.
16. Do not mix new batteries in use with semi-used batteries, over-discharge may occur.
17. When connecting a battery pack to a charger, ensure correct polarity.
18. When the battery is hot, please do not touch it and handle it, until it has cooled down.
19. Do not remove the outer sleeve from a battery pack nor cut into its housing.
20. When find battery power down during use, please switch off the device to avoid over discharge.
21. Unplug a battery by holding the connector itself and not by pulling at its cord.
22. After use, If the battery is hot. Before recharging it, allow it to cool in a well-ventilated place out of direct
sunlight.
23. Never put a battery into water or seawater
compartment ,otherwise batteries may generate hydrogen gas , which could cause an explosion if exposed
to an ignition source
7. Do not attempt to take batteries apart or subject them to pressure or impact. Heat may be generated or fire
may result. The alkaline electrolyte is harmful to eyes and skin, and it may damage clothing upon contact.
8. Keep away from children. If swallowed,contact a physician at once.
9. Do not short circuit batteries, permanent damage to batteries may result
10. Do not incinerate or mutilates batteries, may burst or release toxic material.
11. Do not solder directly to cells or batteries.
12. Store batteries in a cool dry place,Always disharge batteries before bulk storage or shipment.
13. If find any noise,excessive temperature or leakage from a battery, please stop its use.
14. When using a new battery for the first time or after long term storage, please fully charge the battery before
use
15. When using a new battery in use with semi-used batteries, over-discharge may occur.
16. Do not mix new batteries in use with semi-used batteries, over-discharge may occur.
17. When connecting a battery pack to a charger, ensure correct polarity.
18. When the battery is hot, please do not touch it and handle it, until it has cooled down.
19. Do not remove the outer sleeve from a battery pack nor cut into its housing.
20. When find battery power down during use, please switch off the device to avoid over discharge.
21. Unplug a battery by holding the connector itself and not by pulling at its cord.
22. After use, If the battery is hot. Before recharging it, allow it to cool in a well-ventilated place out of direct
sunlight.
23. Never put a battery into water or seawater
Notes: 1. Ta: Ambient Temperature.
2. Approximate charge time from discharged rate, for reference only.
3. IEC61951-2(2003) Cycle Life Test:
2. Approximate charge time from discharged rate, for reference only.
3. IEC61951-2(2003) Cycle Life Test:
Cycle No.
Charge
Rest
Discharge
1
0.1C×16hrs
none
0.25C×2hrs20mins
2-48
0.25C×3hrs10mins
none
0.25C×2hrs20mins
49
0.25C×3hrs10mins
none
0.25C to 1.0V/cell
50
0.1C×16hrs
1-4hr(s)
0.2C to 1.0V/cell
Cycle 1 to 50 shall be repeated until the discharges duration on any 50th cycle becomes less than 3hrs
Manufacture reserves the right to alter or amend the design, model and specification without prior notice
深圳市伟之冠电池有限公司
Shenzhen Vigor Power Battery Co., Ltd.