Техническая Спецификация для Graupner Hendheld RC 2.4 GHz No. of channels: 8 33116
Модели
33116
162 Program description: Info display
Info Display
Date, time, transmitter ID and memory card
Use the arrow buttons of the left or right-hand touch-key
to leaf through to the “Info” menu point of the multi-
function menu:
to leaf through to the “Info” menu point of the multi-
function menu:
servo set.
D/R expo
wing mixer
contr set.
phase trim
free mixer
servo disp
basic sett
fail-safe
telemetry
teach/pupi
info disp
servo set.
D/R expo
free mixer
contr set.
heli mixer
swashp.mix
servo disp
basic sett
fail-safe
telemetry
teach/pupi
info disp
Touch the central
SET
button of the right-hand touch-key
to open the menu point:
RFID
firmware ver.
date
time
SD-CARD
available
1.234
0Mb
0%
ABCDEF12
2012/03/01(THU)
11:22:33s
0Mb
This menu displays transmitter-specific information,
some of which can be altered where necessary and
sensible.
Use the arrow buttons of the left or right-hand
touch-key to select the appropriate line, then touch the
central
some of which can be altered where necessary and
sensible.
Use the arrow buttons of the left or right-hand
touch-key to select the appropriate line, then touch the
central
SET
button of the right-hand touch-key. In the
highlighted value field you can now alter the default
value using the arrow buttons of the right-hand touch-
key, and conclude your input with a further touch of the
central
value using the arrow buttons of the right-hand touch-
key, and conclude your input with a further touch of the
central
SET
key.
RFID
RFID
firmware ver.
date
time
SD-CARD
1.234
0Mb
ABCDEF12
2012/03/01(THU)
11:22:33s
This line displays the transmitter’s identification number.
This number is specific to the transmitter, and is only
issued once for each transmitter. During the binding
process this ID is transmitted to the receiver (amongst
other data), so that it is able at any time to identify the
radio signals of “its” transmitter.
This number is specific to the transmitter, and is only
issued once for each transmitter. During the binding
process this ID is transmitted to the receiver (amongst
other data), so that it is able at any time to identify the
radio signals of “its” transmitter.
Version
RFID
firmware ver.
date
time
SD-CARD
1.234
0Mb
ABCDEF12
2012/03/01(THU)
11:22:33s
This line displays the version number of the transmitter
software currently installed.
By comparing the number shown here with the update
version available for the same product on the Internet
at www.graupner.de you can judge whether an update
to the transmitter’s operating system is necessary and
useful.
software currently installed.
By comparing the number shown here with the update
version available for the same product on the Internet
at www.graupner.de you can judge whether an update
to the transmitter’s operating system is necessary and
useful.
In some circumstances our Service department may
also ask you for the version number.
also ask you for the version number.
Date
RFID
firmware ver.
date
time
SD-CARD
1.234
0Mb
ABCDEF12
2012/03/01(THU)
11:22:33s
If necessary, select this line using the arrow buttons ** of
the left or right-hand touch-key, then select the month or
day field. A brief press of the central
the left or right-hand touch-key, then select the month or
day field. A brief press of the central
SET
button of the
right-hand touch-key activates the corresponding value
field, and you can then set the year, month or day using
the arrow buttons of the right-hand touch-key. A further
brief press of the central
field, and you can then set the year, month or day using
the arrow buttons of the right-hand touch-key. A further
brief press of the central
SET
button of the right-hand
touch-key concludes the input process. The available
range of years runs from 2000 to 2135.
The weekday, shown in brackets at far right in abbrevi-
ated form, is automatically generated from the date.
range of years runs from 2000 to 2135.
The weekday, shown in brackets at far right in abbrevi-
ated form, is automatically generated from the date.
Notes:
The date and time of day can also be set using the
•
PC program available for the corresponding product
on the Internet at www.graupner.de; this requires that
the transmitter should be connected to a PC in the
appropriate manner.
The date and time are protected from data loss due
on the Internet at www.graupner.de; this requires that
the transmitter should be connected to a PC in the
appropriate manner.
The date and time are protected from data loss due
•
to power failure - for example, when the battery is
swapped - by a user-replaceable buffer battery.
swapped - by a user-replaceable buffer battery.