Техническая Спецификация для Graupner Hendheld RC 2.4 GHz No. of channels: 8 33116

82

Basic model-specific settings for model helicopters

Before you start programming specific parameters, 
some basic settings must be entered which apply only 
to the currently active model memory. Select the “

settings” (Basic model settings) menu using the arrow 
buttons of the left or right-hand touch-key, and press the 
central 

 button of the right-hand touch-key:

mod.mem.

servo set.

D/R expo

free mixer

contr set.

heli mixer

swashp. mix

servo disp

basic sett

fail-safe

telemetry

base sett.

mod name

stick mode

rotor direct

swashplate

1

right

1  servo

cut  off

–––

+150%

–100%

Touch the 

 button of the right-hand touch-key to 

move to the next screen page, where you can select 
characters to assemble the model name. You can enter 
up to nine characters to define a model name:

0123456789

model name

?

: ;

ABCDEFGHIJKLMNO

STA

R

PQ

R

STUVWXYZ

Use the arrow buttons of the left-hand touch-key to 
select the desired character. Touch one of the arrow but-

tons  of the right-hand touch button, or its central 

 button, to move to the next position in the name, at 

which point you can again select a character. Simultane-
ously touching the  or  buttons of the right-
hand touch-key (

CLEAR) inserts a space at that point.

You can move to any character position within the input 
field using the  buttons of the right-hand touch-key.
You can return to the previous menu page by briefly 
pressing the central 

 button of the left-hand touch-

key.
The model name entered in this way appears in the 
basic display, and also in the sub-menus of the “

memory” menu point.
Stick mode
Basically there are four possible ways of arranging the 
principal control functions of a model helicopter on 
the two dual-axis sticks: the primary functions are roll, 
pitch-axis, tail rotor and throttle / collective pitch. Which 
of these options you select depends on your individual 
preferences and flying style:

“MODE 2” (Throttle at left stick)

“MODE 3” (Throttle at right stick) “MODE 4” (Throttle at left stick)

“MODE 1” (Throttle at right stick)

pitch axis

tail rotor

pitch axis

tail rotor

throttle

roll

roll

throttle

tail rotor

tail rotor

throttle

throttle

pitch axis

pitch axis

roll

roll

pitch axis

pitch axis

roll

roll

Motor/Pitch

throttle

tail rotor

tail rotor

throttle

throttle

roll

roll

pitch axis

pitch axis

tail rotor

tail rotor

Use the arrow buttons  of the left or right-hand 
touch-key to select the “

Stick mode” line; the select field 

is now framed:

mod name

stick mode

rotor direct

swashplate

1

right

1  servo

cut  off

–––

+150%

–100%

STARLET

Briefly press the 

 button: the current stick mode 

appears highlighted. Now use the arrow buttons of the 
right-hand touch-key to choose one of the options 1 to 4.
By simultaneously touching the  or  buttons of 
the right-hand touch-key (

CLEAR) the display reverts to 

stick mode “1”.
A further brief press on the 

 button disables the 

select field again, so that you can change to a different 
line.

mod name

stick mode

rotor direct

swashplate

1

right

1  servo

cut  off

–––

+150%

–100%

STARLET

You will require a particular program variant to suit the 
number of servos which operate the collective pitch 
function. 
Select “Swashplate” with the arrow buttons  of 
the left or right-hand touch-key, and the select field is 
framed. Touch the 

 button: the current number of 

collective pitch servos is highlighted on the screen. You 
can now determine the required variant using the arrow