Техническая Спецификация для DJI Quadcopter RtF incl. GPS, incl. camera Inspire 1 with 2RC

©

 2014 DJI. All Rights Reserved. 

Remote Controllers

INSPIRE 1

  User Manual

Use the gimbal dial on the remote controller to control the pitch movement of the camera in the 

single remote controller mode, however, you cannot control the pan movement of the camera. 

Setting Up Dual Remote Controllers Mode

Dual Remote Controllers mode is disabled by default. Users must enable this feature on the “Master” 

remote controller by through the DJI Pilot app. Follow the steps below for setup:

“Master” Remote Controller:

1.  Connect the remote controller to your mobile device and launch the DJI Pilot app. 
2.  Go to the Camera page, and tap  

 to enter the remote controller settings window.

3.  Tap “Set RC Status” to enable Master-and-Slave mode. 

4.  Select “Master” in the “Set RC Status” section to set the remote controller as “Master” remote controller.

RC Control Settings

Set RC Status

Slave RC List

Master and Slave

RC Settings

Master

OFF

RC Name

Connection Password

T12254

1234

Slave

“Slave” Remote Controller:

1.  Tap “Search for Master Controller” to search the “Master” remote controller.

Master

OFF

Slave

RC Control Setting

Set RC Status

RC Name

Search for Master Controller

Request Control

Master RC List

Master and Slave

RC Settings

S88642

5. Enter the connection password for the “Slave” remote controller.