Справочник Пользователя для Greisinger GMH 2710KPenetration thermometer, 602703
Модели
602703
H81.0.01.6C-05
Operating Manual GMH 2710 / GMH 2710-K
page 3 of 8
_____________________________________________________
_____________________________________________________________________________
3 Safety Requirements
This device has been designed and tested in accordance with the safety regulations for electronic devices.
However, its trouble-free operation and reliability cannot be guaranteed unless the standard safety measures
and special safety advises given in this manual will be adhered to when using the device.
1. Trouble-free operation and reliability of the device can only be guaranteed if the device is not subjected to
However, its trouble-free operation and reliability cannot be guaranteed unless the standard safety measures
and special safety advises given in this manual will be adhered to when using the device.
1. Trouble-free operation and reliability of the device can only be guaranteed if the device is not subjected to
any other climatic conditions than those stated under "Specification".
If the device is transported from a cold to a warm environment condensation may cause in a failure of the
function. In such a case make sure the device temperature has adjusted to the ambient temperature
before trying a new start-up.
If the device is transported from a cold to a warm environment condensation may cause in a failure of the
function. In such a case make sure the device temperature has adjusted to the ambient temperature
before trying a new start-up.
2. WARNING: If there is a risk whatsoever involved in running it, the device has to be switched off
immediately and to be marked accordingly to avoid re-starting.
Operator safety may be a risk if:
- there is visible damage to the device
- the device is not working as specified
- the device has been stored under unsuitable conditions for a longer time.
In case of doubt, please return device to manufacturer for repair or maintenance.
Operator safety may be a risk if:
- there is visible damage to the device
- the device is not working as specified
- the device has been stored under unsuitable conditions for a longer time.
In case of doubt, please return device to manufacturer for repair or maintenance.
3. WARNING:
Do not use these products as safety or emergency stop devices or in any other application
where failure of the product could result in personal injury or material damage.
Failure to comply with these instructions could result in death or serious injury and material
damage.
where failure of the product could result in personal injury or material damage.
Failure to comply with these instructions could result in death or serious injury and material
damage.
4 Display and Control Elements
4.1 Display elements
1: Main display
Display of the current temperature
2: Secondary display
On demand: Display of MIN , Max or hold-
value, with MIN/MAX/HLD-symbols
4.2 Control elements
Key 1:
on/off key
Key 2:
max/min
press shortly: minimum value
press again: maximum value
press again: return to standard display
press for 2 sec.: reset minimum and maximum values
press shortly: minimum value
press again: maximum value
press again: return to standard display
press for 2 sec.: reset minimum and maximum values
Key 3:
hold: (auto hold deactivated)
press shortly: The measuring cu
press shortly: The measuring cu
rrent value is ‚frozen‘
(hold-
function), ‘HLD’ is displayed
hold: (auto hold activated)
press shortly:
press shortly:
Restart “catching” of stable value