Техническая Спецификация для DeTeWe Outdoor 8000 Quad Case 208048
Модели
208048
Outdoor 8000
Outdoor 8000
12
Outdoor 8000
Outdoor 8000
13
Confirmation tone (Roger Beep) on/off
After the button has been released, the device emits a confirmation tone so
that the receiver can identify that his message has ended. At the same time, an audio
signal is emitted for the sending party which implies that the send button was operated
correctly.
that the receiver can identify that his message has ended. At the same time, an audio
signal is emitted for the sending party which implies that the send button was operated
correctly.
•
Press
five times. ro appears on the display.
•
Press
to activate the confirmation tone (ON)
or
to deactivate (OFF).
•
Press
to select the option and return to the
Receive Mode.
On/off touch tone
With active touch tone, the device bleeps for a short period if a button is pressed.
•
Press
six times. to appears on the
display.
•
Press
to activate the touch tone (ON) or to
deactivate (OFF).
•
Press
, to select the option and return to the
Receive Mode.
Dual Channel Monitor Function (DCM)
In Receive mode, the walkie-talkie is set on a channel with CTCSS Code. The walkie-
talkie receives the transmitted signal only in this channel and with this CTCSS-Code.
You can receive another channel with CTCSS Code with Dual Channel Monitor
function.
talkie receives the transmitted signal only in this channel and with this CTCSS-Code.
You can receive another channel with CTCSS Code with Dual Channel Monitor
function.
•
Press
seven times. DCM OFF appears
on the display.
•
Press
or
, to adjust channel.
•
Press
,
to confirm channel selection and
retrieve menu item SELECT CTCSS SUB-CHANNEL
(SUB CHANNEL SELECTION).
(SUB CHANNEL SELECTION).
•
Press
or
, to adjust CTCSS Code.
•
Confirm with
.
Select
OFF to turn off this channel selection function. If the Dual Channel Monitor
function is activated, the walkie-talkie alternates back and forth between the Standby
channel + CTCSS and the Dual Channel + CTCSS.
channel + CTCSS and the Dual Channel + CTCSS.
Keypad lock
•
Press the
and
button together for 4 seconds to
enable the keypad lock.
The
The
symbol appears on the display.
•
Press the
and
button together once again to
disable the keypad lock.
Using the Headset
Your DeTeWe Outdoor 8000 walkie-talkie set comes with high quality special headsets
(also called as Air Tube headsets) designed for secure grip and maximum possible
shielding of environmental noise.
(also called as Air Tube headsets) designed for secure grip and maximum possible
shielding of environmental noise.
To use, connect the headset to the headset jack on your walkie-talkie (see picture in
front) and insert the earplugs either in the right or left ear.
front) and insert the earplugs either in the right or left ear.
While using later, take note that the volume is adjusted in such a way that it does not
damage your sense of hearing. The air tube of the headset hose can be led down
behind the ear.
damage your sense of hearing. The air tube of the headset hose can be led down
behind the ear.
For further improvement of grip, you have the option to attach the headset on your
clothing by means of a clip. The same applies to the microphone fixed on the cable.
clothing by means of a clip. The same applies to the microphone fixed on the cable.
The microphone is equipped with a button that must be pressed in order to talk. This
substitutes the PTT button on walkie-talkie when headset is connected. Like radio, the
headset also supports the VOX function. This enables you to talk without pressing a
button (see page 10).
substitutes the PTT button on walkie-talkie when headset is connected. Like radio, the
headset also supports the VOX function. This enables you to talk without pressing a
button (see page 10).