Справочник Пользователя для Insys Modem 56k 4.1 11-02-01-01-40.028
Модели
11-02-01-01-40.028
INSYS Modem 336/56k 4.1 (UL)
Description
Please observe our safety instructions.
1.
Mounting on DIN rail
2.
Connecting the power supply
a) Connecting the ground connection
b) Connecting the power supply 10..60V DC
b) Connecting the power supply 10..60V DC
1
2
4
5
6
7
8
9
10
3
GND
GND
X1
GND
Reset
GND
Input 1
Input 2
GND
10...60 VDC
1
2
4
5
6
7
8
9
10
3
Pow
e
r
s
upp
ly
IN
1
1
IN
2
2
Ex
t.
t.
Rese
t
Note: The minimum value is 10V DC.
The maximum value is 60V DC.
Power-LED
lights up
lights up
3.
Switch on power supply
4.
Connection with the PC
Connect the 9-pin jack at the modem with the serial interface
of your computer.
Connect the 9-pin jack at the modem with the serial interface
of your computer.
5.
Driver Installation
If you use a terminal program or the HSComm program, the
installation of a driver is not necessary. If you use another ap-
plication, a driver may be necessary. Please find our current
drivers at http://www.insys-tec.de/ or install the standard
modem 336 under Windows.
If you use a terminal program or the HSComm program, the
installation of a driver is not necessary. If you use another ap-
plication, a driver may be necessary. Please find our current
drivers at http://www.insys-tec.de/ or install the standard
modem 336 under Windows.
6.
Communication with the Modem
Now, start your communication program on the PC and set it
to the used COM interface. The modem will automatically ad-
just to the baud rate of your PC.
to the used COM interface. The modem will automatically ad-
just to the baud rate of your PC.
7.
Communication Control via a Terminal Program
Perform a short test using your terminal program.
(TeraTermPro, ProcommPlus).
Perform a short test using your terminal program.
(TeraTermPro, ProcommPlus).
July 06
15