Техническая Спецификация для Conrad Energy LiPoBattery7.4 V / 800 mAh () Connector system BEC / XH 467c61
Модели
467c61
Page 5 of 5
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92242 Hirschau
Item no.: 23 80 83
Item no.: 23 80 83
Material Safety Data Sheet
14. Transport Information:
The battery models listed have aggregate equivalent lithium content below the 8g. And shipment contains no item listed under
IATA DGR Special Provision A154 and meets all requirements under UN Manual of Tests and Criteria Part III, subsection 38.3.
No
ITEMS
RESULT
REMARKS
1
Altitude simulation
Pass
2
Thermal test
Pass
3
Vibration
Pass
4
Shock
Pass
5
External short circuit
Pass
Test 1 to 5 must be conducted in sequence on the same cell
or battery
or battery
6
Impact
Pass
7
Overcharge
Pass
Only battery do need this test
8
Forced Discharge
Pass
The product is not classified as dangerous under the current edition of the IATA dangerous goods regulations and according
Section II of PI965 all applicable Carriers. The product is safe for air transportation and not regulated by IATA DGR.The
product is also comply with all requirements under IMDG.
Each package is labelled and well passed the 1.2m drop test. The manufacture data is labelled on each battery.The gross
weight of each packages is less than 10Kg.The products are packaged according to the packaging instruction 965 of DGR.
15. Regulatory Information:
See ACGIH exposure limits information as noted in Section3. US: This MSDS meets/exceeds OSHA requirements.
International: This MSDS conforms to European Union (UN), the International Standards Organization (ISO) and the
International Labor Organization (ILO) and as documental in ANSI (American National Standards Institute) Standard
Z400.1-1993.