Справочник Пользователя для ConiuGo 700100107 EasyGuard II 700100107
Модели
700100107
17
Revision 9.0
GSM Alarm & Telemetry systems
No operator:
Counts the timer down to zero, then the systems makes a reset
With operator:
It shows zero
10. Configuration mode
To enter the configuration mode, you have to press the exclamation mark [!]. This
normally will be found by pressing the [Shift] and the [1] key at the same time. If [!] is
not available on your keyboard keep pressed the [Alt] key and type in 33. This se-
lects the ASCII- character 33 as code for the [!].
When you have entered the [!] you will be asked if you want to change to the configu-
ration mode. If you enter [y] and [
↵
] for “yes”, all active applications of the Module will
be suspended until you exit the configuration mode.
No menu settings are case-sensitive. All inputs that are made on
the keyboard have to be completed with return [
↵
↵↵
↵
].
All changed settings will only come into effect if the <S>ave
Changes function is executed BEFORE leaving the configura-
tion mode!
When the screen shows wrong signes in the terminal software
CommLite you have the following options to change that:
•
Press ALT button when the status screen is open
Turns the curser off and shows after the prozess all informa-
tions.
•
Press Space button when the status screen is open
After pressing the space button the screen was build up a
second time.