Справочник Пользователя для ConiuGo 700100107 EasyGuard II 700100107

Модели

700100107

Revision 9.0

GSM Alarm & Telemetry systems

1. XXXXXXXXXXXX X XXXX XXX X XXXXXXXX ---- - SMS_ 1

No.:

Shows the number of the choosen action in this part of the connection

settings. All settings (1 or 0 or X) beside this number in the same line

are dedicated for this action.

PP:

Means „Power Pin“. Here you can choose whether the system should

react on the change of the current powering mode (power supply or ac-

cumulator).

1 : Powerd by regular power supply

0 : Powered over the accumulator(e.g. in case of power loss)

X : The value will be ignored and is not neccessary for this action

D_In:

Means the digital inputs. In the row you have the input 1 up to 12. If you

have versions with only 4 digital inputs on the hardware side, only set-

tings of the first 4 digital are neccesary for you. Please ignore the other

setting possibilities of the last 8 inputs (value X).

1 : The input is not pulled to ground

0 : The input is pulled to ground

X : The value will be ignored and is not neccessary for this action

A_In:

This means the analoge inputs.

1 : Meassurement is inside the right tolerance

0 : Meassurement is outside the right tolerance(above or under)

X : The value will be ignored and is not neccessary for this action

Zeit:

This means the 3 possible time frames.

1 : The setted time frame is important for this action

0 : The setted time frame is not important for this action

X : The time frame will be ignored and is not neccessary for this

action

GSM:

This means the connection to the choosen provider.

1 : The value is important for the action

0 : The value is not important for the action

X : The value will be ignored and is not neccessary for this action