Справочник Пользователя для ConiuGo 700100107 EasyGuard II 700100107
Модели
700100107
43
Revision 9.0
GSM Alarm & Telemetry systems
No. D_In PP A_In TIME GSM SMS HTime R OUTPTNAME
1. XXXXXXXXXXXX X XXXX XXX X 1XXX ---- - Voice communi.
1. XXXXXXXXXXXX X XXXX XXX X 1XXX ---- - Voice communi.
<4> Send System Status
By this connection you define the settings when the actual system status will sent.
Connection settings – Send System Status
--------------
Nr. D_In PP A_In ZEIT GSM SMS HZeit R NAME
1. XXXXXXXXXXXX X XXXX XXX X XXXXXXXX ---- - STATUS S.
--------------
Nr. D_In PP A_In ZEIT GSM SMS HZeit R NAME
1. XXXXXXXXXXXX X XXXX XXX X XXXXXXXX ---- - STATUS S.
Example:
When disconnected, a digital input is in condition "1" and can be switched to "0" for
simple tests by connecting it to the extended ground ("
⊥
") of the alarm system. The
"0" shown here on input no. 1, would trigger the action on the combination
table.
Nr. D_In PP A_In TIME GSM SMS HTime R NAME
1. XXXXXXXXXXXX X XXXX XXX X 1XXXXXXX ---- - STATUS S.
1. XXXXXXXXXXXX X XXXX XXX X 1XXXXXXX ---- - STATUS S.
12.5 Change connection settings
Deliberately which connection setting is desired to be changed: You have to enter
the number of the connection you want to be changed. Then the parameters can be
modified step by step.
Change connection
-----------------
For 12 digital inputs:
For Power Pin:
For analog inputs:
For time inputs:
For GSM status:
For SMS input:
……………………………………
……………………………………
-----------------
For 12 digital inputs:
For Power Pin:
For analog inputs:
For time inputs:
For GSM status:
For SMS input:
……………………………………
……………………………………
In this procedure you can select between the entries “1”, “0” or “X”. These entries
mean:
“X“:
The triggering of the action is independent from this value.