Справочник Пользователя для ConiuGo 700100107 EasyGuard II 700100107
Модели
700100107
7
Revision 9.0
GSM Alarm & Telemetry systems
Depending on the GSM provider, SMS messages may be de-
layed relevantly. Check with your provider what the regular de-
livery times are.
Depending on utilisation of the processor, all actions may be
delayed some seconds until executed.
All system settings are entered via serial interface connection with the use of a ter-
minal software. This allows the Module to be system-independent, meaning it can be
programmed from virtually any computer platform.
For programming, there is a firmware integrated into the Module with a simple, user-
friendly surface, working on any terminal software.
The operation of the module in the GSM network causes tele-
phone costs. If telephone numbers are entered incorrectly, it
may result in high expenses. ConiuGo
®
accepts no responsibil-
ity for those costs but advises to test the programmed Module
thoroughly.
5. Description of Interfaces
Connection for power supply
As written in the system manual delivered with your GSM module.
Connection for accumulator
(Advanced GSM Module only)
Input for accumulator (optional accessory). The accumulator will charged in the stan-
dard use by the normal power supply. When connecting, please make sure that the
polarity is correct!
RS 232 interface of D Sub 9
D Sub 9 interface for the connection to the serial interface of a computer during con-
figuration.
Ground
Connections for the internal ground.