Техническая Спецификация для Texas Instruments TLK110 Evaluation Module TLK110CUSEVM TLK110CUSEVM
Модели
TLK110CUSEVM
TLK110CUSEVM Specification
3
TLK110CUSEVM Specification
3.1
Overview
The TLK110CUSEVM is a Texas Instruments platform that allows a customer to evaluate the TLK110
device and demonstrate the advanced features specified in the TLK110 datasheet.
device and demonstrate the advanced features specified in the TLK110 datasheet.
The EVM supports 10/100 Base-T and is IEEE 802.3 standard compliant.
The TLK110CUSEVM operates with a single supply (5V or 3.3V) from the MII. All other voltages required
for the TLK110 are internally generated in the device.
for the TLK110 are internally generated in the device.
The TLK110CUSEVM is designed to work in industrial temperatures.
3.2
Required Resources
Any equipment that provides a standard IEEE 802.3, Clause 22 MII DTE interface; e.g. SmartBits/Netcom
box.
box.
3.3
Features
The TLK110CUSEVM features include:
•
Industrial temperatures (-40
°
C to 85
°
C)
•
Industrial temperature external magnetics
•
Control and status:
–
Configurable 8 PHY Addresses
–
01h (default) or any other address between 00h - 07h using
jumpers as describes in
–
8 LEDs
–
2 power, 6 status LEDs (speed, link, and active data)
•
Strap options:
–
MII/RMII jumper (MII disable)
–
Resistor strapping options:
•
Configurable PHY addresses 08h - 31h
•
CFG_ANEG_MODE
•
CFG_ANAEG_SPD_0 ,1
•
CFG_CROSSOVER
–
RESET _N jumper
•
Connections for the following interfaces:
–
MII connector
–
RJ-45 connector
•
Single sided component placement
•
On-board clock
–
crystal/oscillator dual footprint
•
On-board power supplied by MII connector only, resistors to configure 5V or 3.3V operation
3
SLLU155
–
December 2011
TLK110 Customer EVM
Copyright
©
2011, Texas Instruments Incorporated