Техническая Спецификация для Texas Instruments TPS40131 Evaluation Module TPS40131EVM TPS40131EVM
![Texas Instruments](https://files.manualsbrain.com/attachments/b46f99d826b2b0e0e5f558c5fb6483942eb9216b/common/fit/150/50/c15ea36eb1fb1cce99a3b94668675bfc78ce832d8d727d9a7bb51a125510/brand_logo.gif)
Модели
TPS40131EVM
www.ti.com
5.5
EN/SYNC Configuration
5.5.1
EN High (Default)
5.5.2
External Synchronization
Test Set Up
Configure JP1 with a jumper as shown in
. The controller will generate its own clock and the
operation is enabled.
Figure 4. Default EN Configuration
Configure JP1 with a jumper as shown in the following figure and connect a clock source to SYNC and
GND pins of J2 as shown in
GND pins of J2 as shown in
. The controller will synchronize to the external clock.
Figure 5. EN/SYNC Configuration
Figure 6. Connect External Clock to J2
SLVU198A – February 2007 – Revised May 2007
Using the TPS40131EVM, A 40A Single Output
9
Two-Phase Synchronous Buck Converter