Справочник Пользователя для Microchip Technology MA180027
PICDEM™ LCD 2 DEMONSTRATION
KIT USER’S GUIDE
2010 Microchip Technology Inc.
DS51662C-page 5
Preface
The VL logo is a registered logo of Varitronix Limited. The illustrations on pages 26, 27,
31, 36, 39 and 45 are copyrighted materials of Varitronix and VL Electronics. Reprinted
with permission.
31, 36, 39 and 45 are copyrighted materials of Varitronix and VL Electronics. Reprinted
with permission.
INTRODUCTION
This chapter contains general information that will be useful to know before using the
PICDEM™ LCD 2 Demonstration Board. Items discussed in this chapter include:
PICDEM™ LCD 2 Demonstration Board. Items discussed in this chapter include:
DOCUMENT LAYOUT
This document describes how to use the PICDEM LCD 2 as a development tool to
emulate and debug firmware on a target board. The manual layout is as follows:
emulate and debug firmware on a target board. The manual layout is as follows:
• Chapter 1. “Introduction” – Describes the hardware of the PICDEM LCD 2
Demonstration Board.
• Chapter 2. “Getting Started” – Describes how to use the PICDEM LCD 2
Demonstration Board.
• Chapter 3. “Using the Demo Software” – Describes how to use the application
in Demo mode and also how it can be customized.
• Appendix A. “Board Technical Information” – Shows the schematic and layout
diagrams for the PICDEM LCD 2 Demonstration Board.
NOTICE TO CUSTOMERS
All documentation becomes dated, and this manual is no exception. Microchip tools and
documentation are constantly evolving to meet customer needs, so some actual dialogs
and/or tool descriptions may differ from those in this document. Please refer to our web site
(www.microchip.com) to obtain the latest documentation available.
documentation are constantly evolving to meet customer needs, so some actual dialogs
and/or tool descriptions may differ from those in this document. Please refer to our web site
(www.microchip.com) to obtain the latest documentation available.
Documents are identified with a “DS” number. This number is located on the bottom of each
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXA”, where “XXXXX” is the document number and “A” is the revision level of the
document.
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXA”, where “XXXXX” is the document number and “A” is the revision level of the
document.
For the most up-to-date information on development tools, see the MPLAB
®
IDE on-line help.
Select the Help menu, and then Topics to open a list of available online help files.