Техническая Спецификация для Microchip Technology AC162053
Header Specification
©
2005 Microchip Technology Inc.
DS51292L-page 3
HEADERS FOR ICE DEVICES
Devices that have built-in debug circuitry do not require a header to use MPLAB ICD 2.
However, some pins and memory must be used to support the ICD function. Special
ICE versions offering additional pins, memory and emulator functions can be used to
provide superior debugging capabilities.
However, some pins and memory must be used to support the ICD function. Special
ICE versions offering additional pins, memory and emulator functions can be used to
provide superior debugging capabilities.
Currently-available headers and their associated ICE devices/supported devices are
shown in Table 2.
shown in Table 2.
INSTALLATION
The MPLAB ICD 2 header is installed by following these steps:
1.
Set up the header board.
2.
Connect the header and MPLAB ICD 2.
3.
Connect the header and the target board.
Set Up the Header Board
To set up a header board:
1.
If the ICD device is not soldered onto the header, plug the ICD device into the
socket on the top of the header.
socket on the top of the header.
2.
Set any jumpers or switches to determine device functionality/selection as
specified in the following sections.
specified in the following sections.
8/14-PIN HEADERS
For some headers, device peripherals need to be selected by setting jumper J1 to the
appropriate position. This will have the effect of selecting the device.
appropriate position. This will have the effect of selecting the device.
TABLE 2:
HEADER TYPES – ICE DEVICES
Header
Part Number
ICE Device Used
Devices Supported
V
DD
Max
64/80 Pin
AC162062
PIC18F87J10-ICE
PIC18F65J10/85J10
PIC18F65J15/85J15
PIC18F66J10/86J10
PIC18F66J15/86J15
PIC18F67J10/87J10
PIC18F65J15/85J15
PIC18F66J10/86J10
PIC18F66J15/86J15
PIC18F67J10/87J10
3.6
Device
Jumper Setting
Peripheral Function
PIC12F629
2-3
A/D Disabled
PIC12F675
1-2
A/D Enabled
PIC16F630
2-3
A/D Disabled
PIC16F676
1-2
A/D Enabled
PIC12F635
2-3
PORTC, Comparator 2 Disabled
PIC16F636
1-2
PORTC, Comparator 2 Enabled