Справочник Пользователя для Insys GSM EASY 4.1 11-02-01-03-01.027
Модели
11-02-01-03-01.027
General
INSYS GSM 4.2 easy
8
January 07
2
General
The INSYS GSM 4.2 easy offers the same technical characteristics and
functionalities as the standard version.
The display of technical data and function descriptions of the standard version
will be omitted in this manual (if possible). We refer to the user manual INSYS
GSM 4.2.
If the INSYS GSM 4.2 easy behaves differently than the standard version, we will
mention this fact in the according passages.
Supported variants of Moeller easy:
The following easy models are supported:
¾
functionalities as the standard version.
The display of technical data and function descriptions of the standard version
will be omitted in this manual (if possible). We refer to the user manual INSYS
GSM 4.2.
If the INSYS GSM 4.2 easy behaves differently than the standard version, we will
mention this fact in the according passages.
Supported variants of Moeller easy:
The following easy models are supported:
¾
easy 500
¾
easy 700
¾
easy 800
¾
easy MFD
The communication protocols of the easy 500 and easy 700 devices are identical,
and the protocols of the easy 800 and easy MFD are identical as file. In the
following, we only need to distinguish between easy 500/700 and easy 800/MFD.
2.1
Possible Uses for INSYS GSM 4.2 easy
The object instances (peripherals and extension modules) of the easy device can
be monitored regarding defined conditions or levels, to enable the sending of
fault messages when changes occur. Depending on the used easy model, not all
object instances are available.
The following object instances can be monitored:
¾
be monitored regarding defined conditions or levels, to enable the sending of
fault messages when changes occur. Depending on the used easy model, not all
object instances are available.
The following object instances can be monitored:
¾
Digital inputs
¾
Digital outputs
¾
Digital registers
¾
Analogue inputs
¾
Analogue outputs
¾
Analogue registers (byte registers, word registers, double word registers)
¾
Current program cycle time
¾
LED state for Moeller easy MFD
The fault message consists of one text, which is permanently allocated to the
value to be monitored. Up to 10 object instances can be monitored altogether.