Техническая Спецификация для Conrad Energy Button cell CR2320 Lithium CR 2320 120 mAh 3 V 1 pc(s) 650195

Модели
650195
Скачать
Страница из 6
Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau
Item no.: 650195
Material Safety Data Sheet
Page 2 of 6
3. Hazardous and Toxicity Class
Class Name : 
Not applicable for regulated class.
Hazard : 
It may cause heat generation or electrolyte leakage. If battery terminals contact with other
metals, Electrolyte is flammable. In case of electrolyte Leakage, move the cell from fire
immediately.
Toxicity : 
Vapor generated from burning cells, may make eyes, skin and throat irritate.
4. First Aid Measures
The product contains organic electrolyte, in case of electrolyte leakage from the cell, actions described below are required.
Eye contact : 
Flush the eyes with plenty of clean water for at least 15 minutes immediately, without rubbing.
Take a Medical treatment. If appropriate procedures are not taken, this may cause an eye
irritation.
Skin contact : 
Wash this contact areas off immediately with plenty of water and soap. If appropriate
procedures are not taken, this may cause sores on the skin.
Inhalation : 
Remove to fresh air immediately. Taken a medical treatment.
5. Fire Fighting Measures
Extinguishing method:
Since vapor, generated from burning cells may make eyes, nose and throat irritate, be sure to
extinguish the fire on the windward side. Wear the respiratory protection equipment in some
cases.
Fire extinguishing agent: 
Dry chemical, alcohol-resistant form, carbon dioxide and plenty of water area effective.
6. Measures for electrolyte leakage from cell
- Take up with absorbent cloth.
- Move the cell away from the fire.
7. Handling and Storage
1. 
When packing the cells, do not allow cell terminals to contact each other, or contact with other metals. Be sure to pack
cells by providing in the packaging box, or in a separate plastic bag so that the single cells are not mixed together.
2.
Use strong materials for packaging boxes so that they will not be damaged by vibration, impact, dropping and stacking
during their transportation. (1) (2) (3)
3.
Do not let water penetrate into packaging boxes during their storage and transportation.
4.
The cells will be stored at room temperature.
5.
Do not store the cell in places of the high temperature exceeding 35 deg. C or under direct sunlight or in front of a stove.
Please also avoid the places of high humidity. Be sure not to expose the cell to condensation, water drop or not to store
it under frozen condition.
6.
Cells are sure to be packed in such a way to prevent short circuits under conditions normally encountered in transport.
(1) (2) (3)
7.
Please avoid storing the cell in the places where it is exposed to the electricity so that no damage will not be caused to
the protection circuit of the cell pack.