Техническая Спецификация для McCulloch SuperLite 4528 SUPERLITE 4528
Модели
SUPERLITE 4528
KEY TO SYMBOLS
2 – English
Symbols
WARNING! Incorrect or careless use of a
hedge trimmer can turn it into a
dangerous tool that can cause serious or
even fatal injury. It is extremely important
that you read and understand the
contents of this operator’s manual.
hedge trimmer can turn it into a
dangerous tool that can cause serious or
even fatal injury. It is extremely important
that you read and understand the
contents of this operator’s manual.
Please read the operator’s manual
carefully and make sure you
understand the instructions before
using the machine.
carefully and make sure you
understand the instructions before
using the machine.
Always wear:
•
Approved hearing protection
•
Approved eye protection
This product is in accordance with
applicable EC directives.
applicable EC directives.
Always wear approved protective
gloves.
gloves.
Wear sturdy, non-slip boots or shoes.
Noise emission to the environment
according to the European
Community’s Directive. The machine’s
emission is specified in chapter
Technical data and on label.
according to the European
Community’s Directive. The machine’s
emission is specified in chapter
Technical data and on label.
Ignition; choke:
Set the choke control
in the choke position.
Air purge.
Starting instructions See the
instructions under the heading
Start and stop.
instructions under the heading
Start and stop.
Other symbols/decals on the machine refer to special
certification requirements for certain markets.
certification requirements for certain markets.
The engine is switched off by moving the
stop switch to the stop position.
CAUTION! The stop switch
automatically returns to the start
position. In order to prevent
unintentional starting, the spark plug cap must be
removed from the spark plug when assembling, checking
and/or performing maintenance.
stop switch to the stop position.
CAUTION! The stop switch
automatically returns to the start
position. In order to prevent
unintentional starting, the spark plug cap must be
removed from the spark plug when assembling, checking
and/or performing maintenance.
Always wear approved protective
gloves.
gloves.
Regular cleaning is required.
Visual check.
Protective goggles or a visor must be
worn.
worn.