Справочник Пользователя для Freescale Semiconductor Demonstration Board for Freescale MC9S12XHY256 Microcontroller DEMO9S12XHY256 DEMO9S12XHY256
Модели
DEMO9S12XHY256
D E M O 9 S 1 2 X H Y 2 5 6
J U L Y 1 5 , 2 0 1 0
U S E R G U I D E
16
Standby Mode
The CAN PHY is configured for normal mode by default. To enable standby (STB) moved,
apply a high logic level at test point TP1.
apply a high logic level at test point TP1.
LCD
The DEMO9S12XHY256 applies a 4 x 40 custom LCD glass connected directly to the target
MCU. Refer to the MC9S12XHY256 Reference Manual for details on use and configuration of
the LCD module. The LCD data sheet can be found on the Support CD received with the
board or at the Axiom Manufacturing Support web site (
MCU. Refer to the MC9S12XHY256 Reference Manual for details on use and configuration of
the LCD module. The LCD data sheet can be found on the Support CD received with the
board or at the Axiom Manufacturing Support web site (
) . Refer to
the MC9S12XHY Reference Manual for details on configuration and use of the LCD module.
Figure 15 at the end of this document shows the signal connections between the target MCU
and the LCD.
Figure 15 at the end of this document shows the signal connections between the target MCU
and the LCD.
LCD Connections
The figure below shows the connections between the target MCU and the GD-5506P Custom
LCD Glass.
LCD Glass.