Справочник Пользователя для Freescale Semiconductor Evaluation Board for KL26 FRDM-KL26Z FRDM-KL26Z
Модели
FRDM-KL26Z
TM
6
Quick Start Guide for FRDM-KL26Z
OpenSDA is an open-standard serial and debug adapter. It bridges serial and debug communications between a USB host
and an embedded target processor. OpenSDA software includes a flash-resident USB mass-storage device (MSD)
bootloader and a collection of OpenSDA Applications. FRDM-KL26Z comes with the MSD Flash Programmer OpenSDA
Application preinstalled. Follow these instructions to run the OpenSDA Bootloader and update or change the installed
OpenSDA Application.
and an embedded target processor. OpenSDA software includes a flash-resident USB mass-storage device (MSD)
bootloader and a collection of OpenSDA Applications. FRDM-KL26Z comes with the MSD Flash Programmer OpenSDA
Application preinstalled. Follow these instructions to run the OpenSDA Bootloader and update or change the installed
OpenSDA Application.
Enter OpenSDA Bootloader Mode
A removable drive should now be visible in the host file
system with a volume label of BOOTLOADER. You are now
in OpenSDA Bootloader mode.
system with a volume label of BOOTLOADER. You are now
in OpenSDA Bootloader mode.
1
Unplug the USB cable if attached.
2
Press and hold the Reset button (SW2).
3
Plug in a USB cable (not included) between a USB
host and the OpenSDA USB connector (labeled
“SDA”).
host and the OpenSDA USB connector (labeled
“SDA”).
4
Release the Reset button.
1
While in OpenSDA Bootloader mode, double-click
SDA_INFO.HTML
SDA_INFO.HTML
in the BOOTLOADER drive. A web
browser will open the OpenSDA homepage
containing the name and version of the installed
Application. This information can also be read as text
directly from SDA_INFO.HTML.
containing the name and version of the installed
Application. This information can also be read as text
directly from SDA_INFO.HTML.
Load an OpenSDA Application
2
Locate the OpenSDA Applications folder in the
FRDM-KL26Z Quick Start Package.
FRDM-KL26Z Quick Start Package.
3
Copy & paste or drag & drop the MSD Flash
Programmer Application (MSD-FRDM-
KL26Z_vXYZ_Pemicro.SDA)
Programmer Application (MSD-FRDM-
KL26Z_vXYZ_Pemicro.SDA)
to the BOOTLOADER
drive.
4
Unplug the USB cable and plug it in again. The new
OpenSDA Application should now be running and a
FRDM-KL26Z
OpenSDA Application should now be running and a
FRDM-KL26Z
drive should be visible in the host file
system.
You are now running the latest version of the MSD Flash
Programmer. Use this same procedure to load other
OpenSDA Applications.
Programmer. Use this same procedure to load other
OpenSDA Applications.
IMPORTANT NOTE:
Follow the “Load an OpenSDA
Application” instructions to update the MSD Flash
Programmer on your FRDM-KL26Z to the latest version.
It is likely that the version provided in this package is
newer than what was preprogrammed on your FRDM-
KL26Z.
Programmer on your FRDM-KL26Z to the latest version.
It is likely that the version provided in this package is
newer than what was preprogrammed on your FRDM-
KL26Z.