Техническая Спецификация для Axxatronic CBRPI-BA-BLK Mini PC CBRPI-BA-BLK
Модели
CBRPI-BA-BLK
raspBerry pi
STYLE ENCLOSURES
universal
enclosures
hand
held
cases
heavy
duty
enclosures
din
rail
Boxes
interface
supports
control
stations
diecast
& metal
Boxes
desktop &
instrument
cases
potting
Boxes
19"
enclosures
19"
suBracks
custom
sized
enclosures
custom
services
Carbon Fibre Lilac Purple
Fitting of the PCB, Light Pipe and Enclosure Assembly
1. Place your Raspberry Pi enclosure base onto a steady surface.
2. Tilting your Raspberry Pi at 45° angle, align the audio and RCA video ports with the machined
holes in the base and push until the PCB clips into the PCB groove.
holes in the base and push until the PCB clips into the PCB groove.
(If you are not fitting the Light pipe skip to step 8, if you are fitting the Light pipe,
continue to step 4)
4. Place your Raspberry Pi top onto a steady surface.
5. Peel off the protective film on the light pipe.
6. Apply one drop of glue onto the smaller end of the recess and two drops of glue onto the other end of the
light pipe location recess. (We recommend using Everbuild Stick 2 All Purpose Superglue)
light pipe location recess. (We recommend using Everbuild Stick 2 All Purpose Superglue)
7. Ensuring that the light pipe is in the correct orientation as shown, place into the recess and hold for five
seconds ensuring that the light pipe is perpendicular to the enclosure top.
seconds ensuring that the light pipe is perpendicular to the enclosure top.
8. Hold the base in one hand (Thumb on the audio connector, fingers over the HDMI connector) Place the top
cover at a 45° angle (Aligning USB connector with USB cut-out) clip over the USB and LAN connectors. Then
clip the opposite end of the top onto the base.
cover at a 45° angle (Aligning USB connector with USB cut-out) clip over the USB and LAN connectors. Then
clip the opposite end of the top onto the base.
9. Peel off the protective film on both the top and base of your enclosure. Push the supplied feet into place if
required.
required.
3. Push the opposite side of the PCB down so that it clips into the second PCB groove in the base.
Light Pipe Assembly
Enclosure Assembly
PCB Assembly
1.
2.
3.
4.
6.
7.
8.