Справочник Пользователя для Keysight Technologies USB data capturing module U2356A Input: 500 kS/s, output: 1 MS/s U2356A OPT 902 + ABD
Модели
U2356A OPT 902 + ABD
22
U2300A Series DAQ Service Guide
2
Calibration
Hardware Connection
The connection to verify the analog input readings and
analog outputs are different. To verify the analog input
readings, see “
analog outputs are different. To verify the analog input
readings, see “
” for descriptions on
the way to connect the instruments. To verify the analog
outputs, see “
outputs, see “
” for descriptions on
hardware setup.
Analog Input Connection
The equipments required for analog input connection are the
DAQ device, Fluke calibrator, terminal block, USB mini- B
cable and SCSI cable. Follow the follwing step- by- step
instruction for analog input connection.
DAQ device, Fluke calibrator, terminal block, USB mini- B
cable and SCSI cable. Follow the follwing step- by- step
instruction for analog input connection.
1 Connect the DAQ device to a PC with a USB mini- B cable
and connect the DAQ device to a U2901A terminal block
using the U2901A SCSI cable.
using the U2901A SCSI cable.
2 Short all the DAQ device’s analog input channels. Refer to
“
” for the pins assignment.
3 Connect the DAQ device’s analog input channels to the
calibrator output.
4 Connect the DAQ device’s analog input ground (AI_GND)
to the calibrator ground. See Figure 2- 1. Note that the
analog inputs shown in the figure uses U2351A as an
example.
analog inputs shown in the figure uses U2351A as an
example.
N O T E
• Ensure that the PC has the DAQ device’s driver and the Agilent IO
Libraries 14.2 or higher installed. Note that the Agilent Measurement
Manager software comes with the standard purchase of the U2300A
Series DAQ devices.
Manager software comes with the standard purchase of the U2300A
Series DAQ devices.
• If you do not have the DAQ device’s driver and the Agilent IO Libraries
14.2 or higher installed, refer to the Agilent U2300A Series Data
Acquisition Devices and Agilent Measurement Manager Quick Start
Guide, for more information on the installation.
Acquisition Devices and Agilent Measurement Manager Quick Start
Guide, for more information on the installation.