Справочник Пользователя для Insys WLAN Serial 11-02-01-06-02.004
Модели
11-02-01-06-02.004
28
Implementation and Configuration INSYS WLAN serial
Network Name SSID
Enter the WLAN network SSID (default “WLANDEMO”). An empty input field indicates a
connection with any available network.
Enter the WLAN network SSID (default “WLANDEMO”). An empty input field indicates a
connection with any available network.
Safety/WEP
Activating the buttons “64 bit WEP” or “128 bit WEP” will switch on WEP encryption as
well as Shared Key Authentication. The following lengths are allowed: 64 bit and 128 bit.
Activating the buttons “64 bit WEP” or “128 bit WEP” will switch on WEP encryption as
well as Shared Key Authentication. The following lengths are allowed: 64 bit and 128 bit.
WEP Key
Up to 4 WEP keys may be stored.
Up to 4 WEP keys may be stored.
For 64 bit encryption each WEP key consists of 10 hexadecimal digits; for 128 bit
encryption each WEP key consists of 26 hexadecimal digits. The hexadecimal digits (0…9
and A…F) may be used. They must be entered without spaces.
Standard Key
One of the up to 4 defined WEP keys will be set up for the encryption.
One of the up to 4 defined WEP keys will be set up for the encryption.
Transfer Rate
Adjustment possibilities for fixed data rates or fallback behavior.
Adjustment possibilities for fixed data rates or fallback behavior.
Connection Status
Clicking on the button “State of connection” will
clearly display the current connection data.
Click the button “Connection Status” again to update the values. The optimum received
signal level will be in the range –50dBm to –60dBm. Values of –80dBm will be sufficient
for a successful connection.
Clicking on the button “State of connection” will
clearly display the current connection data.
Click the button “Connection Status” again to update the values. The optimum received
signal level will be in the range –50dBm to –60dBm. Values of –80dBm will be sufficient
for a successful connection.
version 1.01 / 10.04