Справочник Пользователя для Foxconn 45GMX-V

35

This item is used to enable or disable the onboard FDC controller.

This item is used to assign the I/O address and interrupt request (IRQ) for the onboard serial 
port 1.

This item is used to assign the I/O address and interrupt request (IRQ) for the onboard serial 
port 2.

This item is used to configure C�M2 P�RT as :
[Normal] : a RS232 device. (optional)
[IrDA] : an IrDA device for maximum 115200 bit/s.
[AS�IR] :  A faster IrDA for 1152000 bit/s.

This item enables you to determine the infrared function of the onboard infrared chip.

This item is used to assign the I/O address and interrupt request (IRQ) for the onboard parallel 
(or Printer) port.

This item is used to select the operation modes for the onboard parallel (or Printer) port. They 
are [SPP], [EPP], [ECP] and [ECP/EPP].

This item is used to enable or disable the Universal Host Controller Interface for USB.

This item is used to enable or disable the Enhanced Host Controller Interface for USB.

Phoenix - AwardBIOS CMOS Setup Utility

USB Device Setting

   

USB 1.1 Controller 

[Enabled]

 

   

Item Help

    USB 2.0 Controller 

[Enabled]

 

 

USB Operation Mode 

[Hi

gh Speed]

 

 

Menu Level  ►

 

 

USB Keyboard Function 

[Enabled]

 

 

USB Mouse Function 

[Enabled] 

 

[Enable] or [Disable]

 

 

USB Storage Function 

[Enabled] 

 

Universal Host

       

 

 

Controller

   

*** USB Mass Storage Device Boot Setting ***

 

  Interface for Universal

       

 

  Serial Bus

  ↑↓→←:Move   Enter:Select    +/-/PU/PD:Value   F10:Save     ESC:Exit   F1:General �elp         

                              

 F5: Previous Values            F7: �ptimi��ed Defaults

Enabled