Листовка для Thecus 2TB Storage Server N299 N299_2100

Модели
N299_2100
Скачать
Страница из 94
2.  Set host name and specify the domain name. 
 
3.  Enable DHCP for setting the IP automatically or Disable DHCP to enter 
your own IP settings. 
 
4.  Repeat steps 2 and 3 for the LAN item under the Network menu to 
configure the LAN port. 
 
5.  In the Network menu, choose the Service item and the Service 
Support screen appears.  
 
6.  Enable or Disable each protocol according to your requirements.  Press 
Apply to confirm the setting. 
 
 
•  For normal usage, enabling all protocols is recommended. 
•  For added security, disable WebDisk support and enable Secure WebDisk 
support. 
•  If DHCP is enabled in the Network Settings screen, UPnP is automatically 
enabled. 
NOTE 
 
 
 
 
For details on configuring your network settings, refer to Chapter 3: System 
Management > 
Step 4: Select RAID Level 
Once the network is configured, you should then select the appropriate RAID level 
and build your RAID array. 
 
1.  From the Storage menu choose RAID item and the RAID Information 
screen appears. Press the Config button and the RAID Configuration 
screen appears.  
 
2.  Select your desired RAID mode. 
 
 
If security is your primary concern, for 2 disks, choose RAID 1. If capacity is your 
primary concern, choose JBOD or RAID 0. See Appendix C for more information. 
NOTE 
 
 
 
3.  Check the hard disks you wish to create a RAID on. Specify a stripe size—
64K is a normal setting.  
 
4.  Press the Create button to build the RAID storage volume. Configuring 
RAID is usually only required for initial setup.  
 
 
Building a RAID storage space may take time, depending on the size of hard drives 
and RAID mode. 
NOTE 
 
 
Step 5: Create Local Users and Groups 
After your RAID is built, you can begin to create local users and groups for the 
N299. 
 
1.  From the Accounts menu, choose Users item and the Local User 
Configuration screen appears. Click Add to add a new user. 
 
2.  Enter a name and password for each user in the Name and Password 
boxes and re-enter the password in the Confirm Password box. 
 
 
 
18