Техническая Спецификация для Helios Preisser DIGI-MET® Instrument 1726 502 Reading range(s) 12.5 mm Reading 0,001 mm Accuracy 0,005 mm 1726 502
Модели
1726 502
13
UsbCom Standard / Professional 2.1
©
Software
•
Transfer to:
Select in which data format the values should be sent to (e.g. MS Excel, text file or
keyboard code).
With „Text file“ the measured values taken from a measuring device will be transferred to a text file; enter the
path and the description of the text file with „File“ and then „Text file-Settings“.
path and the description of the text file with „File“ and then „Text file-Settings“.
Note:
When using several measuring devices the values of each individual measuring
device should be transferred into separate text file.
With „Excel“ the values are transferred into Microsoft Excel. If global (see 3.6 File) is deactivated, you
can select a separate Excel file or template as the destination. If global (see 3.6 File) is activated then the
measured values of all measuring devices are transferred into a common Excel file or template. The set up
possibilities in „Open As“ for the individual measuring devices are deactivated, the global Excel file settings
can be conducted; see section „3.6 File“. Additionally, you can enter in the respective „Sheet“, the respective
„Column“ and the respective „Start Row“ in which the values will be prompted.
can select a separate Excel file or template as the destination. If global (see 3.6 File) is activated then the
measured values of all measuring devices are transferred into a common Excel file or template. The set up
possibilities in „Open As“ for the individual measuring devices are deactivated, the global Excel file settings
can be conducted; see section „3.6 File“. Additionally, you can enter in the respective „Sheet“, the respective
„Column“ and the respective „Start Row“ in which the values will be prompted.
Use „Insert in“ to select whether the measured values will be transferred into a column or row.
Note:
When a write protected Excel file or template is used, the write protection must be
removed from column 256 (IV)!