Техническая Спецификация для 4d Systems 4D-BEZEL-43-B
4D SYSTEMS 4.3” Bezel for the uLCD-43PT
© 2014 4D SYSTEMS Page 3 of 6 www.4dsystems.com.au
4
.3
”
B
ez
el
f
or
the
uLC
D
-4
3P
T
1. Description
The 4D Systems 4.3” Display Bezel is a plastic bezel
for the uLCD-43PT display module.
This bezel provides a sleek cover to the uLCD-43PT
display module, and also providing an easy
method to panel mount the display module into
an enclosure. The bezel mounts the display
module, while also providing a mounting solution
into a panel, keeping all securely together.
Spring clips attach to the bezel in four locations,
and hold it tightly to the enclosure/wall panel,
offering a range of panel thickness from 1mm to
2.5mm without the need to add washers. If a
panel thicker than 2.5mm is required, washers can
be placed under the spring clip, however this is not
recommended practice.
Please Note, this bezel is only designed for indoor
use. It is not weather tight, nor does it offer any IP
rating. It should only be used indoors in clean
environments as it offers little protection to the
circuitry of moisture or particles.
Bezels are available in Black or White.
Bare 4.3” Bezel - Front
Bare 4.3” Bezel - Back
2. Features
Plastic 4.3” Bezel designed for panel mounting
the uLCD-43PT
the uLCD-43PT
Simple cut-out required, no mounting holes
requires to be drilled in the panel
requires to be drilled in the panel
Brass mounting inserts in the rear of the bezel
4x Spring Clips for attaching the bezel to the
panel
panel
8x M2 mounting screws and washers included
uLCD-43PT Mounted in 4.3” Bezel - Back
uLCD-43PT Mounted in 4.3” Bezel - Front
Spring Clips