Техническая Спецификация для Analog Devices ADF4113HV Evaluation Board EV-ADF4113HVSD1Z EV-ADF4113HVSD1Z
Модели
EV-ADF4113HVSD1Z
Evaluation Board User Guide
UG-165
Rev. A | Page 3 of 24
QUICK START GUIDE
Follow these steps to quickly evaluate the
device:
motherboard to the
board and to the PC.
3. Follow the hardware driver installation procedure that
appears if you are using Windows XP.
4. Connect the power supplies to banana connectors (6 V
to 12 V).
5. Connect 15 V to V
P
.
6. Run the Analog Devices Int-N PLL software.
device in the
Select Device and Connection tab in the main window of
the evaluation board software.
the evaluation board software.
8. Click the Main Controls tab. Set the correct values for
Reference Frequency (25 MHz) and RF VCO Output
Frequency (ranging from 1200 MHz to 2100 MHz), and
then click Write All Latches.
Frequency (ranging from 1200 MHz to 2100 MHz), and
then click Write All Latches.
9. Connect the spectrum analyzer to J2.
10. Measure the results.
10. Measure the results.