Техническая Спецификация для Analog Devices ADF4153 Evaluation Board EV-ADF4153SD1Z EV-ADF4153SD1Z
Модели
EV-ADF4153SD1Z
Evaluation Board User Guide
UG-167
Rev. A | Page 3 of 24
QUICK START GUIDE
Follow these steps to quickly evaluate the
1. Install the system development platform (SDP) drivers.
2. Install the Analog Devices ADF4153-4-6-7 software.
3. Connect the SDP-S motherboard to the PC and to the
2. Install the Analog Devices ADF4153-4-6-7 software.
3. Connect the SDP-S motherboard to the PC and to the
4. Follow the hardware driver installation procedure.
5. Connect the power supplies to banana connectors (6 V
5. Connect the power supplies to banana connectors (6 V
to 12 V).
6. Run the ADF4153-4-6-7 software.
7. Select the SDP board and the
7. Select the SDP board and the
Device and Connection tab of the software front panel
window.
window.
8. Click the Main Controls tab. Update all registers.
9. Connect the spectrum analyzer to J2.
10. Measure the results.
9. Connect the spectrum analyzer to J2.
10. Measure the results.