Техническая Спецификация для Atmel Evaluation Board AT32UC3C-EK AT32UC3C-EK
Модели
AT32UC3C-EK
AVR32919
32151A-AVR-09/10
4.5 Programming & Debugging Interface
The Programming & Debugging Interface block of the Atmel AT32UC3C-EK provides
the developer a mean to debug an application running on the Atmel
AT32UC3C0512C.
the developer a mean to debug an application running on the Atmel
AT32UC3C0512C.
4.5.1 Overview
Figure 4-12. Atmel AT32UC3C-EK Programming & Debugging Interface Logical View
JTAG+
Awire (J9)
NEXUS
(J23)
Debug
Trace
The main Programming and Debugging Interface of the AT32UC3C-EK is meant to
program and debug the Atmel AT32UC3C0512C. There are two debug interfaces
implemented in the AT32UC3C0512C: the JTAG interface accessible through the J24
connector and the NEXUS interface accessible through the J23 connector.
program and debug the Atmel AT32UC3C0512C. There are two debug interfaces
implemented in the AT32UC3C0512C: the JTAG interface accessible through the J24
connector and the NEXUS interface accessible through the J23 connector.
Figure 4-13. AT32UC3C-EK Top View Programming and Debugging Interface
Location
Location
J23
J29