Техническая Спецификация для Atmel Evaluation Board using the SAM7SE Microcontroller AT91SAM7SE-EK AT91SAM7SE-EK
Модели
AT91SAM7SE-EK
AT91SAM7SE-EK Evaluation Board User Guide
4-1
6241B–ATARM–22-Mar-07
Section 4
Configuration
4.1
Jumpers
Note:
1. These jumpers are provided for power consumption measurement use. By default,
they are closed. To use this feature, the user has to open the strap and insert an
anmeter.
anmeter.
4.2
Audio
Configuration
Configuration
Table 4-1. Jumpers
Designation
Default
Setting
Setting
Feature
J2
Closed
3.3V Jumper
J5-1
Opened
Erases all internal Flash memory when the board is
powered. To do so, the user will have to close this
jumper for at least 10 ms.
powered. To do so, the user will have to close this
jumper for at least 10 ms.
J5-2
Closed
VDDIO Jumper
J5-3
Closed
VDDCORE Jumper
J5-4
Closed
VDDIN Jumper
J5-5
Closed
VDDPLL Jumper
J5-6
Closed
VDDFLASH Jumper
Table 4-2. Audio Configuration
Designation
Default
Setting
Setting
Feature
R5
Soldered
Enables the use of the audio stereo DAC AT73C213