Техническая Спецификация для Atmel Evaluation Board using the SAM7SE Microcontroller AT91SAM7SE-EK AT91SAM7SE-EK
Модели
AT91SAM7SE-EK
AT91SAM7SE-EK Evaluation Board User Guide
2-1
6241B–ATARM–22-Mar-07
Section 2
Setting Up the AT91SAM7SE-EK
Board
2.1
Electrostatic
Warning
Warning
The AT91SAM7SE-EK evaluation board is shipped in protective anti-static packaging.
The board must not be subjected to high electrostatic potentials. A grounding strap or
similar protective device should be worn when handling the board. Avoid touching the
component pins or any other metallic element.
The board must not be subjected to high electrostatic potentials. A grounding strap or
similar protective device should be worn when handling the board. Avoid touching the
component pins or any other metallic element.
2.2
Requirements
In order to set up the AT91SAM7SE-EK evaluation board, the following items are
needed:
needed:
!
The AT91SAM7SE-EK evaluation board itself.
!
AC/DC power adapter (5V at 2A), 2.1 mm x 5.5 mm