Техническая Спецификация для Atmel MCU Evaluation Kit AT91SAM7X-EK AT91SAM7X-EK
Модели
AT91SAM7X-EK
AT91SAM7X-EK Evaluation Board User Guide
2-1
6195E–ATARM–22-Mar-07
Section 2
Setting Up the AT91SAM7X-EK
Evaluation Board
2.1
Electrostatic
Warning
Warning
The AT91SAM7X-EK evaluation board is shipped in a protective anti-static package.
The board must not be subjected to high electrostatic potentials. A grounding strap or
similar protective device should be worn when handling the board. Avoid touching the
component pins or any other metallic element.
The board must not be subjected to high electrostatic potentials. A grounding strap or
similar protective device should be worn when handling the board. Avoid touching the
component pins or any other metallic element.
2.2
Requirements
In order to set up the AT91SAM7X-EK evaluation board, the following items are
required:
required:
!
the AT91SAM7X-EK evaluation board itself
!
an A/B-type USB cable
or
!
a DC USB power adapter (5V at 0.5 A) with USB A/B cable
Note:
The kit is not delivered with a JTAG/ICE interface which is required to start eval-
uating the device.
uating the device.