Техническая Спецификация для Atmel ATmega328P Xplained Mini MEGA328P-XMINI MEGA328P-XMINI

 

ATmega328P Xplained Mini User Guide [USER GUIDE]

42287A-MCU-05/2014

5

If any other cpu clk than the external clk supplied by the mEDBG is used the debugWIRE is not

guaranteed to work.

How to program the target ATmega328P using the AVR

®

 JTAGICE mkII, JTAGICE3, or other Atmel

Programmers.

1. Connect the External Programmer to the PC.

2. Connect the External Programme to the evaluation board ISP connector (J204) (Need the 6-pin 100mil

adapter connected to the JTAGICE).

3. Go to Atmel Studio: Tools/Device Programming, and select the External Programmer connected as Tool,

Select Device = ATmega328P, Interface = ISP and click Apply.

4. Select "Memories" and locate the source hex or elf file and click Program.

5. If the source contains fuse settings go to "Production file" and upload the elf file and program the fuses.

Recommended fuse setting:
BOOTSZ = 1024W_1C00,
BOOTRST = [ ],
RSTDISBL = [ ],
DWEN = [ ],
SPIEN = [X],
WDTON = [ ],
EESAVE = [ ],
BODLEVEL = DISABLE,
CKDIV8 = [ ],
CKOUT = [ ],
SUT_CKSEL = EXTCLK_6CK_14CK_65MS

How to program the ATmega32U4 using the AVR

®

 JTAGICE mkII, JTAGICE3, or other Atmel Programmers.

To restore the mEDBG FW use the /tools/mEDBG/mEDBG_fw.zip from the Studio installation.

1. Connect the External Programme to the PC.

2. Connect the External Programme to the board connector (J100).

3. Go to Atmel Studio: Tools/Device Programming, and select the External Programmer connected as Tool,

select Device = ATmega32U4, Interface = JTAG and click Apply.

4. Select "Memories" and locate the source hex or elf file and click Program.

5. If the source contain fuse settings go to "Production file" and upload the elf file and program the fuses.

Recommended fuse setting:
BODLEVEL = DISABLE
HWBE = [X]
OCDEN = [ ]
JTAGEN = [X]
SPIEN = [X]
WDTON = [ ]
EESAVE = [X]
BOOTSZ = 2048W_3800