Техническая Спецификация для Atmel ATSAM3S-EK2
6
Atmel AVR2055
8348D-AVR-06/12
Figure 2-2. BitCloud Profile Suite solution architecture with ZigBee coprocessor and host processor.
For initial application prototyping and experimentation, as well as for some target
applications where the host processor is a full-featured PC with a Python
programming environment, a configuration of the ZAppSI host library and host
applications configured for use on a Windows
®
PC is also provided as part of this
SDK. This allows the user to quickly set up a working SE/HA/BA-enabled device by
executing certain behaviors via host applications/scripts written in Python on a host
NOTE
In their default configuration, Runner and the zappsi host library do not support calls
into the stack’s hardware abstraction layer and board support package APIs. As an
option, the user may extend the set of commands interpreted by Runner to support
this functionality.
2.2.3 Security settings
Because of the type of data and control within a network based on one of the
standard ZigBee profiles, application-level security is a key requirement. At a
minimum, the application will use link keys, which are optional in the ZigBee and
ZigBee PRO stack profiles but are required by ZigBee Smart Energy, Building
Automation, and Home Automation networks. The trust center and all devices on the
network must support the installation and use of these keys. Smart Energy
applications may also use the Smart Energy security mode, which involves the Key
3 Getting started
3.1 Hardware configuration
Hardware configuration instructions and software prerequisites depend on the
particular hardware platform used to evaluate and develop with the BitCloud PS SDK.
To get started, proceed to the platform-specific sections listed below.
To get started, proceed to the platform-specific sections listed below.