Техническая Спецификация для Atmel Evaluation Kit AT91SAM9M10-G45-EK AT91SAM9M10-G45-EK
Модели
AT91SAM9M10-G45-EK
439
SAM9M10 [DATASHEET]
6355F–ATARM–12-Mar-13
30. Parallel Input/Output Controller (PIO)
30.1
Description
The Parallel Input/Output Controller (PIO) manages up to 32 fully programmable input/output lines. Each I/O line
may be dedicated as a general-purpose I/O or be assigned to a function of an embedded peripheral. This assures
effective optimization of the pins of a product.
may be dedicated as a general-purpose I/O or be assigned to a function of an embedded peripheral. This assures
effective optimization of the pins of a product.
Each I/O line is associated with a bit number in all of the 32-bit registers of the 32-bit wide User Interface.
Each I/O line of the PIO Controller features:
• An input change interrupt enabling level change detection on any I/O line.
• A glitch filter providing rejection of pulses lower than one-half of clock cycle.
• Multi-drive capability similar to an open drain I/O line.
• Control of the the pull-up of the I/O line.
• Input visibility and output control.
The PIO Controller also features a synchronous output providing up to 32 bits of data output in a single write
operation.
operation.