Техническая Спецификация для Atmel Xplained Pro Evaluation Kit ATSAMD20-XPRO ATSAMD20-XPRO
Модели
ATSAMD20-XPRO
124
Atmel | SMART SAM D20 [DATASHEET]
Atmel-42129K–SAM-D20_datasheet–06/2014
15.8.11 Interrupt Enable Clear
This register allows the user to disable an interrupt without doing a read-modify-write operation. Changes in this register
will also be reflected in the Interrupt Enable Set (INTENSET) register.
will also be reflected in the Interrupt Enable Set (INTENSET) register.
Name:
INTENCLR
Offset:
0x34
Reset:
0x00
Property:
Write-Protected
z
Bits 7:2 – Reserved
These bits are unused and reserved for future use. For compatibility with future devices, always write these bits to
zero when this register is written. These bits will always return zero when read.
These bits are unused and reserved for future use. For compatibility with future devices, always write these bits to
zero when this register is written. These bits will always return zero when read.
z
Bit 1 – CFD: Clock Failure Detector Interrupt Enable
0: The Clock Failure Detector interrupt is disabled.
0: The Clock Failure Detector interrupt is disabled.
1: The Clock Failure Detector interrupt is enabled and an interrupt request will be generated when the Clock Fail-
ure Detector Interrupt flag is set.
ure Detector Interrupt flag is set.
Writing a zero to this bit has no effect.
Writing a one to this bit will clear the Clock Failure Detector Interrupt Enable bit and the corresponding interrupt
request.
request.
z
Bit 0 – CKRDY: Clock Ready Interrupt Enable
0: The Clock Ready interrupt is disabled.
0: The Clock Ready interrupt is disabled.
1: The Clock Ready interrupt is enabled and will generate an interrupt request when the Clock Ready Interrupt flag
is set.
is set.
Writing a zero to this bit has no effect.
Writing a one to this bit will clear the Clock Ready Interrupt Enable bit and the corresponding interrupt request.
Bit
7
6
5
4
3
2
1
0
CFD
CKRDY
Access
R
R
R
R
R
R
R/W
R/W
Reset
0
0
0
0
0
0
0
0